Set up BeoLink Gateway - Interfaces - Favourites Lists
49
-
Command
: The command that is executed when a logo is selected in the BeoLink App. See in Help for full explanation of combining elements in
the command string. The command must be filled in manually.
-
Logo
: A logo can be fetched using the logopicker, see below, or by entering sufficient information in the URL field for the favourite. The logo will
be shown in the user interfaces.
-
URL
: The full URL of the logo image to show. The URL must
point out the
valid image as it will be used periodically by the mobile application to
retrieve the logo. The URL will be filled in automatically when the logo picker is used. The URL can be entered manually.
Logo picker
Note! The logo picker only works when an Internet connection is available.
Press on a logo field.
The logo picker shows a pop-up window for selecting logos from the B&O repository, and shows up by clicking the logo. Available logos are
shown in groups of 50. It is possible to search for a channel using the filter. A search string will immediately restrict the channels displayed to only
the matching entries.
When a logo has been chosen the picker window will close and complete the URL path and command fields, and show the selected logo. The
caption will also be updated, but not if it has been edited explicitly.