![background image](http://html.mh-extra.com/html/bang-and-olufsen/beolab-7-1/beolab-7-1_user-manual_471281005.webp)
a
b
c
c
d
d
c
c
5
On this page is shown how to
fasten the loudspeaker to the
wall bracket (optional
accessory). For information on
how to set up the wall bracket,
refer to the Guide enclosed
with the wall bracket.
a
Fasten the loudspeaker bracket
to the wall bracket. Use the two
longest screws (M5 × 25 mm).
b
Fasten the wall bracket cover, as
shown in its own Guide.
c
Fasten the loudspeaker to the
bracket. Use the two shortest
screws (M5 × 8 mm). However, do
not fully tighten the screws before
you have made the adjustments
mentioned below (
d
).
Adjustments:
Use the two screws
(
d
) to adjust the loudspeaker so that
it is parallel to the lower edge of the
television. Then align the loudspeaker
front with the television and tighten
the two screws (
c
).
UG02 BeoLab 7-1 (non-BV7)_ENG.indd 5
UG02 BeoLab 7-1 (non-BV7)_ENG.indd 5
9/30/04 11:24:27 AM
9/30/04 11:24:27 AM