![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beolab-3500/beolab-3500_manual_3823739022.webp)
Ready for use …
When you have finished setting-up
BeoLab 3500, connect it to the
mains supply. Then switch on the
power for the main system.
When first switched on, the red
stand-by indicator in the display
will light up and, after a while, the
clock will be shown in the display.
However, if your main system is of
a type without the clock option,
the display will only show
:
Option settings
BeoLab 3500 can be set to the
following Options:
Option 0:
Used if you want to
disable remote control operation.
Option 4:
Used if you install
BeoLab 3500 in the same room
as your main system (for example
in a large L-shaped room with
two separate listening positions).
Option 5:
Used if you set up a
Bang & Olufsen television in the
same room as BeoLab 3500.
Option 6:
Used in a setup with the
main system in one room, and
BeoLab 3500 in another – as
described in this guide (this is
the factory setting).
Use a Beo4 remote control to set
the Option. The entire system must
be switched to stand-by.
> While holding down the • button,
press
LIST
.
> Let go of both buttons.
> Press
LIST
repeatedly until
OPTION? is shown in the Beo4
display, and press
GO
.
> Press
LIST
repeatedly until L.OPT
is shown in the Beo4 display,
and then key in the appropriate
number (
0
,
4
,
5
or
6
).
TIMER
BANG & OLUFSEN
MUTE
Option 4
Option 5
Option 6
22
For further information about the
display, refer to ‘Information in the
display’ (pp. 14–15) in this Guide.
Содержание BeoLab 3500
Страница 1: ...BeoLab 3500 Guide ...
Страница 26: ......
Страница 27: ......
Страница 28: ...3507741 0703 www bang olufsen com ...