Bang & Olufsen BeoLab 10, Руководство пользователя

Страница: 3 / 12

Daily use
When you have finished setting
up the loudspeaker as
described on the following
pages, connect the entire
system to the mains.
Loudspeaker protection
The loudspeaker is equipped with a
thermal protection system which
prevents damage from overheating.
If an error occurs – or the speaker
units become overheated – the
system automatically switches the
loudspeaker to standby.
To restore the sound:
> Disconnect the loudspeaker from
the mains supply.
> Allow the system time to reset or
cool down (approximately 3–5
minutes).
> Reconnect the loudspeaker to
the mains supply.
Should the problem persist,
contact your Bang & Olufsen
retailer.
To clean the loudspeaker
Clean dusty surfaces using a dry,
soft cloth. If necessary, remove
grease stains or persistent dirt with
a lint­free, firmly wrung cloth,
dipped in a solution of water
containing only a few drops of
mild detergent, such as washing­
up liquid.
Never use a vacuum cleaner to
clean the exposed speaker
membrane in the acoustic lens.
However, the loudspeaker front
cloth may be cleaned with a
vacuum cleaner with a soft brush
nozzle, and set to the lowest level.
Never use alcohol or other solvents
to clean any parts of the loud­
speaker!
To switch on and off
When you switch on your Bang &
Olufsen system, the loudspeaker
switches on simultaneously, and
when you switch the system off
again, the loudspeaker also
switches to standby.
Caution:
Do not touch the
exposed speaker membrane in the
acoustic lens!
!
3