8
R E A D Y F O R U S E . . .
To complete the setting-up proce-
dure, make your presettings of
sound levels, favourite radio
stations, etc. as described in the
User’s guide for your Beocenter
9300.
When you have finished setting up your Beocenter 9300
and your other equipment, connect the Beocenter to the
mains. A red dot appears in the display of the Beocenter
indicating that the system is in stand-by mode, ready to be
used.
If you have a compatible Bang & Olufsen TV connected to
your Beocenter, you must program both systems according
to your particular setup. The Beocenter 9300 can be pro-
grammed for these setups (options):
•
Option 1.
To be used for a setup with your Beocenter
9300 and the Beovision placed together in one room
(this is the factory setting).
•
Option 2.
To be used for a setup with the Beocenter 9300
placed in one room and your Beovision placed in another.
•
Option 0.
To be used if you want to disable remote
control operation of the Beocenter 9300 (to enable
remote control again, select one of the other options).
To do the programming, switch both systems to stand-by
and use your Beolink 1000 remote control:
• Direct the Beolink 1000 towards your Beocenter, then
press SOUND, the appropriate option number (1, 2, or 0),
and then STORE.
The selected option number will be shown in the
Beocenter display.
• Direct the Beolink 1000 towards your Beovision TV, then
press PICTURE, the appropriate option number (1 or 2),
and then STORE.
Untitled-1
27-06-00, 13:27
8
Содержание Beocenter 9300
Страница 1: ...B E O C E N T E R 9 3 0 0 ...
