Bang & Olufsen BeoCenter 6, Справочник

Страница: 43 / 72

43
Connect a set-top box
Disconnect all involved systems from the
mains before you connect external
equipment.
> Connect one end of a 21-pin AV cable to the
set-top box.
> Run the cable to the AV 1 or AV 2 socket on the
back of the television.
> Connect the IR transmitter to the IR OUTPUT
socket on the television.
> If your set-top box delivers HDTV video signal,
and your television is HD-ready, connect the set-
top box to either the DVI-I or Y-Pb-Pr sockets
also.
> Fasten the IR transmitter to the IR receiver of
the set-top box.
To be able to use the remote control included with
your set-top box, do not cover its IR receiver
entirely.
Automatic standby …
When you register a set-top box in the
CONNECTIONS menu, you can also select an
‘AUTO STANDBY’ time for your set-top box. This
means that you can select if the connected set-top
box should switch to standby automatically.
The options are:
AFTER 0 MIN … The set-top box switches to stand-
by immediately when you select another source.
AFTER 30 MIN … The set-top box switches to stand-
by 30 minutes after you have selected another
source*.
AT TV STANDBY … The set-top box switches to
standby when you switch the television to stand-
by.
NEVER … The set-top box does not switch to stand-
by automatically.
FOLLOW TV … The set-top box switches on,
when you switch your television on and it
switches to standby, when you switch your
television to standby.
Set-top boxes must be set up in accordance with
the documentation enclosed with them.
*If you switch the television to standby before the
30 minutes have passed, the set-top box is also
switched to standby.
BeoCenter Set-top box
Downloaded from ManualsNet.com search engine