U S I N G T H E C D P L A Y E R
10
Raises or lowers the clamp which
holds the CD in place
RADIO
LOAD
Pressing the LOAD button in the middle
section of the operating panel raises the
clamp which holds the CD in place.
You can now remove any CD from the
compartment and load the one you
want to play. Always load the CD with
the label facing you.
Loading a CD
Pressing LOAD again lowers the clamp.
If you start playing the CD, the clamp
lowers automatically.
Playing the CD
When you press the CD button to play
the CD you have loaded, all information
in the CD, for example the total number
of tracks, will first be registered. Then
the CD will start playing from the
beginning.
While the CD is playing you can step to
other tracks by pressing the appropriate
number buttons, or by stepping from
one to the other using STEP
>
or
<
STEP.
Playing will continue until the CD has
reached the end. The BeoCenter will
then pause, waiting for another instruc-
tion to play. If no further instructions
are received, it automatically switches to
stand-by after 30 minutes.
Of course, you can stop the CD any time
just by pressing STOP, which pauses the
CD. If you select another source, the CD
stops automatically.
Plays the CD in the compartment
Plays specific track numbers
Plays the next track
Plays the current track again – press
twice to play the previous track
Pauses playing
Resumes playing
CD
9
0
through
STEP
>
<
STEP
STOP
PLAY
The other functions the CD player can
perform are the following:
•
Searching forward or backward for a
specific passage
•
Scanning the tracks on a CD
•
Programming a sequence of tracks
•
Editing a CD to play selected tracks
•
Naming your CDs
•
Playing tracks in random order
•
Playing a CD continuously
•
Playing a specific passage over and
over again
See pages 12-17 for details of these functions.
Page 11 gives details of the displays and how to
read them.
