- 2 -
INTRODUCTION.
Each Model 70 loudspeaker system comes to you in two
seperate cartons. The larger carton contains the main
cabinet and an accessory bag containing plugs, spare fuse
and fixing screws. The main cabinet is complete with leg
assembly and electrostatic power supply/filter unit, both
of which are fixed in position. The smaller carton contains
the 701 electrostatic unit which is ready for insertion in
the sockets provided on the top surface of the main cabinet.
WARNING.
IT IS IMPORTANT THAT THE ASSEMBLY AND INSTALLATION
INSTRUCTIONS BE CAREFULLY READ BEFORE CONNECTING
THIS SYSTEM TO THE MAINS OR AUDIO SUPPLY.
ASSEMBLY INSTRUCTIONS.
Unpack the larger of the two cartons and remove the
accessory bag from the underside of the main cabinet. Unpack
the electrostatic unit from the smaller carton. We suggest
you retain the special Polystyrene pack from the smaller
carton for possible future transportation of the electrostatic
unit.
The electrostatic unit should now be inserted in the
sockets provided on the top surface of the main cabinet.
Spigots on both feet of the 701 electrostatic unit locate in
the corresponding sockets and they can only be assembled in
the correct manner.
Having inserted the electrostatic unit make secure by
screwing through the hole provided in the rear of each foot
with the special instrument-head wood screws and cups included
in the accessory pack. The system is now ready, after checking
mains supply voltage, for installation.
UNIT BE REMOVED WITH MAINS SUPPLY CONNECTED OR WHILST
THE SYSTEM IS IN OPERATION.