BandRich BandLuxe M280 Series, Руководство пользователя

Страница: 50 / 51

BandLuxe
®
M280 Series HSUPA Module Datasheet
50
<stat>
(state of the call):
0 active
1 held
2 dialing (MO call)
3 alerting (MO call)
4 incoming (MT call)
5 waiting (MT call)
6 disconnected
<mode>
(bearer/teleservice):
0 voice
1 data
2 fax
3 voice followed by data, voice mode
4 alternating voice/data, voice mode
5 alternating voice/fax, voice mode
6 voice followed by data, data mode
7 alternating voice/data, data mode
8 alternating voice/fax, fax mode
9 unknown
<mpty>:
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
<tch>:
TCH assigned flag; It is used to indicate if Traffic Channel has be assigned.
<number>:
string type phone number in format specified by <type>
<type>:
type of address octet in integer format (refer TS 24.008 [8] subclause 10.5.4.7)
D.12 User Scenario
D.12.1 Originate call
atd123; (originate call to number: 123)
OK
$CPI:1,0,2,0,0,0,"123",129
(call in dialing state)
$CPI:1,0,3,0,0,1,"123",129 (call in alerting state)
$CPI:1,0,0,0,0,1,"123",129 (call in active state)
AT+CHUP (Hangup call)
OK
$CPI:1,0,6,0,0,0,"123",129
(call in disconnected state)
D.12.2 Termination call
RING (incoming call)
$CPI:1,1,4,0,0,1,"0277051073",128 (call in incoming state, call number = “0277051073”)
ata (answer call)
OK (respose OK)
$CPI:1,1,0,0,0,1,"0277051073",128 (call in active state)
at+chup (hangup call)
OK
$CPI:1,1,6,0,0,0,"0277051073",128
(call in disconnected state)
D.12.3 PIN Code Enable
at+clck="sc",1,"0000"
OK