Installation and wiring
Information about the device's environment
•
Observe the notes and regulations regarding the power supply and functional ground.
•
Observer the specified bend radius when connecting cables.
•
Ventilation openings are not permitted to be covered or blocked.
•
The device is only permitted to be operated in closed rooms and not permitted to be exposed to direct
sunlight.
•
The climatic ambient conditions and environmental conditions must be taken into account – see the tech-
nical data of the converter used.
General installation instructions
•
When installed in a closed housing, there must be sufficient volume for air circulation -
.
•
When connecting installed or connected peripherals, follow the instructions in the peripheral device's doc-
umentation.
Transport and storage
Condensation may form under certain environmental conditions or rapid climatic changes. For im-
proved acclimatization and to avoid damage, the device must be slowly adapted to the room temper-
ature.
When transporting at low temperatures or in the event of large temperature fluctuations, the collection of moisture
in or on the device is not permitted. Moisture can cause short circuits in electrical circuits and damage the device.
If a device is transported or stored without packaging, all environmental influences such as shocks, vibrations,
pressure and moisture have an unprotected effect on the device. Damaged packaging indicates that the device
has been severely affected by environmental influences and may have been damaged.
This can result in malfunctions of the device, machine or system.
Use of third-party products
If third-party devices or components are used, the relevant manufacturer's documentation must be observed. If lim-
itations or interactions by or with third-party products are possible, this must be taken into account in the application.
26
SDL3 Converter User's manual V 2.01