B&R Power Panel C50, Руководство пользователя

Страница: 6 / 76

Introduction
6 Power Panel C50 User's manual V1.10
1 Introduction
Information:
B&R makes every effort to keep documents as current possible. The most current versions can be
downloaded from the B&R website ( www.br-automation.com ).
1.1 Manual history
Version Date Comment
1.10 May 2020 Content-related changes and corrections:
•
Added information regarding derating.
•
Updated description of the reset button.
•
Added information regarding permissible lengths of POWERLINK and Ethernet connections.
• Added optional accessory 6ACCRPP2.0001-000.
• Editorial changes.
1.02 April 2020 Updated system requirements.
1.01 November 2019 Corrected power consumption of the 7.0" and 15.6" variants in the technical data.
1.00 September 2019 First edition
1.2 Information about this document
This document is not intended for end customers! The safety guidelines required for end customers
must be incorporated into the operating instructions for end customers in the respective national lan-
guage by the machine manufacturer or system provider.
1.2.1 Organization of notices
Safety notices
Contain only information that warns of dangerous functions or situations.
Signal word Description
Danger! Failure to observe these safety guidelines and notices will result in death, severe injury or substantial damage to property.
Warning! Failure to observe these safety guidelines and notices can result in death, severe injury or substantial damage to property.
Caution! Failure to observe these safety guidelines and notices can result in minor injury or damage to property.
Notice! Failure to observe these safety guidelines and notices can result in damage to property.
General notices
Contain
useful
information for users and instructions for avoiding malfunctions.
Signal word Description
Information:
Useful information, application tips and instructions for avoiding malfunctions.
1.2.2 Guidelines
European dimension standards apply to all dimension diagrams.
All dimensions in mm.
Unless otherwise specified, the following general tolerances apply:
Nominal dimension range General tolerance per
DIN ISO 2768 medium
Up to 6 mm ±0.1 mm
Over 6 to 30 mm ±0.2 mm
Over 30 to 120 mm ±0.3 mm
Over 120 to 400 mm ±0.5 mm
Over 400 to 1000 mm ±0.8 mm