Accessories • Cable accessories
Chapter 5 Accessories
Power Panel C-Series User's Manual V1.00
87
3 TB510x 4/6-pin terminal block
The single-row 4-pin terminal block is needed for the X2X Link interface. The single-row 6-pin terminal block is
needed for the option board.
3.1 Order data
0TB5106.2110-01
0TB5104.2110-01
Model number
Short description
Terminal blocks
0TB5104.2110-01
Accessory terminal block, 4-pin (2.5), cage clamp, 0.5 mm²
0TB5106.2110-01
Accessory terminal block, 6-pin (2.5), cage clamp, 0.5 mm²
Table 51: 0TB5104.2110-01, 0TB5106.2110-01 - Order data
3.2 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory and can deviate
from those specified for the complete system. The data specifications for the complete system take
precedence over those of individual components.
The technical data in this manual is current as of its creation/publication. We reserve the right to make
changes.
Product ID
0TB5104.2110-01
0TB5106.2110-01
Terminal block
Number of pins
4
6
Type of terminal clamp
Cage clamps
1)
Cage clamps
Cable type
Only copper wires (no aluminum wires!)
Distance between contacts
2.5 mm
Connection cross section
AWG wire
26 to 20
With wire end sleeves
0.25 to 0.5 mm²
Flexible
0.14 to 0.5 mm²
Inflexible
0.14 to 0.5 mm²
Electrical characteristics
Nominal voltage
125 V
Nominal current
2)
4 A
Table 52: 0TB5104.2110-01, 0TB5106.2110-01 - Technical data
1)
Cage clamp terminal blocks cannot be used side-by-side.
2)
Take the respective limit data for the I/O modules into consideration!
4 Data storage media
Technical data and additional information about data storage media can be found in the respective documen-
tation. This can be found and downloaded under the model number of the data storage medium at
5 Cable accessories
Technical data and additional information about POWERLINK and X2X Link cables can be found in the respective
documentation. This can be found and downloaded under the model number of the cable on the B&R website at
.
