Software • Automation Runtime
250
Panel PC 800 User's Manual V1.30
10 Automation Runtime
10.1 General information
An integral component of Automation Studio is the real-time operating system, which makes up the software kernel
that allows applications to run on a target system.
•
Garantiert höchstmögliche Leistung für die eingesetzte Hardware
•
Runs on all B&R target systems
•
Macht die Applikation hardwareunabhängig
•
Applikationen können einfach zwischen B&R Zielsystemen portiert werden
•
Garantierter Determinismus durch zyklisches System
•
Configurable jitter tolerance in all task classes
•
Unterstützung aller relevanten Programmier-Sprachen, wie IEC-61131-3 und C
•
Reiche Funktionsbibliothek nach IEC-61131-3 und zusätzlich die erweiterte B&R Automation Library
•
Eingebunden in Automation NET. Zugriff auf alle Netzwerke und Bussysteme über Funktionsaufrufe oder
durch Konfiguration im Automation Studio™
B&R Automation Runtime is fully embedded in the corresponding target system (the hardware where Automation
Runtime is installed). It allows application programs to access I/O systems (e.g. via fieldbus) and other devices
(interfaces, networks, etc.).
10.2 Order data
Model number
Short description
Figure
9A0003.02U
USB port button holder DS9490B
1A4600.10-5
B&R Automation Runtime ARwin, including license sticker
1A4600.10-2
B&R Automation Runtime ARwin, ARNC0
1A4600.10-3
B&R Automation Runtime ARwin+PVIControls incl. license
sticker and copy protection
1A4600.10-4
B&R Automation Runtime ARwin+ARNC0+PVIControls
1A4601.06-5
B&R Automation Runtime ARemb, including license sticker
Table 208: 9A0003.02U, 1A4600.10-5, 1A4600.10-2, 1A4600.10-3, 1A4600.10-4, 1A4601.06-5 - Order data
10.3 Automation Runtime Windows (ARwin)
System support is provided by ARwin with an AS 3.0.90 / AR 3.06 upgrade.
An Automation Runtime dongle (USB interface button holder with Automation Runtime ARwin dongle) must be
connected to run ARwin on a Panel PC 800, see "Order data" on page 250.
Information:
An Automation Runtime dongle is no longer required in AS 3.0.90 / AR 4.00.
Information:
In ARwin 4.06, ADI access is no longer possible from Windows and ARwin at the same time since the
ADI interface is blocked by ARwin.
The following components are required in order to be able to access the ADI interface by Windows
and ARwin simultaneously:
•
ADI driver V 1.8 (or higher)
•
ARwin I4.06 (or higher)
10.4 Automation Runtime Embedded (ARemb)
System support is provided by ARemb with an AS 3.0.90 / AR 4.00 upgrade. An Automation Runtime dongle is
not required.