Installation • Connection examples
164
Panel PC 800 User's Manual V1.30
5.3 One Automation Panel 900 system via onboard SDL
An Automation Panel 900 is connected to the integrated SDL interface (onboard) via an SDL cable. USB devices
can only be connected directly to the Automation Panel (i.e. without a hub).
Panel PC 800
SDL segment
max. 40 m
USB OK
SDVO-B
Independent of segment length
Internal device number on the PPC
Monitor/Panel
Connection
Figure 76: One Automation Panel 900 system via onboard SDL
5.3.1 Base system requirements
The following table lists the possible PPC800 system unit and CPU board combinations necessary to implement
the configuration shown in the figure above. If a combination results in a limitation of the maximum resolution, this
is also indicated (e.g. when connecting a non-B&R Automation Panel 800 / 900 device).
With system unit
CPU board
5PC820.1505-00
5PC820.1906-00
Limitation
Resolution
5PC800.B945-00
5PC800.B945-10
✓
✓
Max. UXGA
5PC800.B945-01
5PC800.B945-11
✓
✓
Max. UXGA
5PC800.B945-02
5PC800.B945-12
✓
✓
Max. UXGA
5PC800.B945-03
5PC800.B945-13
✓
✓
Max. UXGA
5PC800.B945-04
5PC800.B945-14
✓
✓
Max. UXGA
5PC800.B945-05
✓
✓
Max. UXGA
Table 126: Possible system unit and CPU board combinations
5.3.2 Link modules
Information:
A corresponding Link module must be selected for each device used.
Model number
Description
Note
5DLSDL.1000-00
Automation Panel Link SDL receiver
Connection for SDL In; transmission of display, touch screen, USB 1.1, matrix key and service data; 24
VDC (order screw clamp 0TB103.9 or cage clamp 0TB103.91 separately)
Table 127: Link modules
5.3.3 Cables
Select an Automation Panel 900 cable from the following table.
Model number
Description
Length
5CASDL.0018-00
SDL cable, 1.8 m
1.8 m ±30 mm
5CASDL.0050-00
SDL cable, 5 m
5 m ±30 mm
5CASDL.0100-00
SDL cable, 10 m
10 m ±50 mm
5CASDL.0150-00
SDL cable, 15 m
15 m ±100 mm
5CASDL.0200-00
SDL cable, 20 m
20 m ±100 mm
5CASDL.0250-00
SDL cable, 25 m
25 m ±100 mm
5CASDL.0300-00
SDL cable, 30 m
30 m ±100 mm
5CASDL.0018-03
SDL flex cable, 1.8 m
1.8 m ±20 mm
5CASDL.0050-03
SDL flex cable, 5 m
5 m ±45 mm
Table 128: Cables for SDL configurations