Technical data • Individual components
Chapter 2
Technical data
Panel PC 800 User's Manual V1.30
129
3.9.20 5ACPCI.RAIC-03
3.9.20.1 General information
This SATA RAID controller supports RAID level 0 and 1 and can be inserted in a PCI slot. The hard disks being
used are specified for 24-hour operation and also feature an extended temperature range.
•
SATA RAID controller
•
RAID level 0 (striped) and 1 (mirrored)
•
2 SATA hard disk drives (suitable for 24-hour operation)
•
Only requires 1 PCI slot
•
Transfer rates up to 150 MB/s
Primary hard disk (HDD 0)
Secondary hard disk (HDD 1)
HDD 0
HDD 1
SATA
RAID
Access LED (yellow) for primary (HDD 0)
and secondary hard disk (HDD 1)
Figure 54: PCI SATA RAID controller
Information:
The PCI SATA RAID controller cannot be used in place of a universal power supply (UPS). If the oper-
ating system is not shut down properly, then this will be detected as an error state (with RAID 1 sets)
at the next system startup and a complete rebuild is performed. If 160 GB of memory are used, this
generally takes approximately 160 minutes (configurable) to complete.
3.9.20.2 Order data
Model number
Short description
Figure
Drives
5ACPCI.RAIC-03
PCI RAID system SATA 2x 160 GB; note: Please see the manual
for information about using this hard disk.
Optional accessories
Drives
5ACPCI.RAIC-04
160 GB SATA hard disk, replacement part for 5ACPCI.RAIC-03;
note: Please see the manual for information about using this
hard disk.
Table 102: 5ACPCI.RAIC-03 - Order data