Technical data • Individual components
124
Panel PC 800 User's Manual V1.30
3.9.18 5AC801.DVDS-00
3.9.18.1 General information
The DVD-ROM slide-in drive can be used in APC810 and PPC800 system units with a slide-in drive slot.
Information:
A slide-in drive can be inserted or removed at any time.
When used in a PPC800
Information:
The expansion 5AC803.SX01-00 or 5AC803.SX02-00 is required in order to use slide-in drives.
When inserted in the slide-in slot, the slide-in drive is accessed internally via SATA and USB.
3.9.18.2 Order data
Model number
Short description
Figure
Drives
5AC801.DVDS-00
DVD-ROM SATA slide-in drive
Table 98: 5AC801.DVDS-00 - Order data
3.9.18.3 Technical data
Information:
The following characteristics, features and limit values only apply to this individual component and can
deviate from those specified for the complete system. For the complete system in which this individual
component is used, refer to the data given specifically for that device.
Product ID
5AC801.DVDS-00
General information
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
GL
Yes
1)
CD / DVD drive
Data transfer rate
Max. 1.5 Gbit/s
Speed
Max. 5090 rpm ±1%
Noise level
Approx. 45 dBA in a distance of 50 cm (full read access)
Compatible formats
CD-DA, CD-ROM mode 1/mode 2
CD-ROM XA mode 2 (form 1, form 2)
Photo CD (single/multi-session)
Enhanced CD, CD text
DVD-ROM, DVD-Video (dual layer), DVD-R (single/multi-border), DVD-R DL (single/mul-
ti-border), DVD-RW (single/multi-border), DVD+R (single/multi-session), DVD+R DL
(single/multi-session), DVD+RW (single/multi-session), DVD-RAM (4.7 GB, 2.6 GB)
Laser class
Class 1 laser
Service life
60000 POH (power-on hours)
Interface
SATA
Startup time
CD
Max. 19 seconds (from 0 rpm to read access)
DVD
Max. 19 seconds (from 0 rpm to read access)
Table 99: 5AC801.DVDS-00 - Technical data