Technical data • Individual components
122
Panel PC 800 User's Manual V1.30
3.9.17 5AC801.HDDS-00
3.9.17.1 General information
This 40 GB hard disk is specified for 24-hour operation, features an extended temperature range and can be used
in APC810 and PPC800 system units with a slide-in drive slot.
Information:
A slide-in drive can be inserted or removed at any time.
When used in a PPC800
Information:
The expansion 5AC803.SX01-00 or 5AC803.SX02-00 is required in order to use slide-in drives.
When inserted in the slide-in slot, the slide-in drive is accessed internally via SATA and USB.
3.9.17.2 Order data
Model number
Short description
Figure
Drives
5AC801.HDDS-00
40 GB SATA slide-in hard disk; 24/7 operation with extended
temperature range. Note: please see the manual for information
about using this hard disk
Table 96: 5AC801.HDDS-00 - Order data
3.9.17.3 Technical data
Information:
The following characteristics, features and limit values only apply to this individual component and can
deviate from those specified for the complete system. For the complete system in which this individual
component is used, refer to the data given specifically for that device.
Product ID
5AC801.HDDS-00
General information
Certification
CE
Yes
cULus
Yes
GOST-R
Yes
GL
Yes
1)
Hard disk drive
Capacity
40 GB
Number of heads
1
Number of sectors
78,140,160
Bytes per sector
512
Cache
8 MB
Speed
5400 rpm ±1%
Startup time
Typ. 3 s (from 0 rpm to read access)
MTBF
750,000 POH
2)
S.M.A.R.T. support
Yes
Interface
SATA
Access time
5.6 ms
Data transfer rate
Internal
Max. 450 Mbit/s
To/From host
Max. 150 MB/s (Ultra DMA mode 5)
Table 97: 5AC801.HDDS-00 - Technical data