Commissioning
Automation Panel 5000 User's manual V2.11
171
6.3 Touch screen calibration
B&R touch screen devices are equipped with a B&R touch controller that supports hardware calibration. This
means that these devices are pre-calibrated at the factory. This feature offers great advantages especially for
replacement parts since recalibration is usually no longer required when replacing a device (identical model/type).
We still recommend calibration for best results and to adapt the touch screen to the needs of the user.
6.3.1 Single-touch (analog resistive)
6.3.1.1 Windows 10 IoT Enterprise 2019 LTSC
After starting Windows 10 IoT Enterprise 2019 LTSC on a Panel PC for the first time, the appropriate touch screen
driver is installed automatically.
On all other devices, the touch screen driver must be subsequently installed to operate the touch screen. The
appropriate driver is available for download in the Downloads section of the B&R website (
).
6.3.1.2 Windows 10 IoT Enterprise 2016 LTSB
After starting Windows 10 IoT Enterprise 2016 LTSB on a Panel PC for the first time, the appropriate touch screen
driver is installed automatically.
On all other devices, the touch screen driver must be subsequently installed to operate the touch screen. The
appropriate driver is available for download in the Downloads section of the B&R website (
).
6.3.1.3 Windows 10 IoT Enterprise 2015 LTSB
After starting Windows 10 IoT Enterprise 2015 LTSB on a Panel PC for the first time, the appropriate touch screen
driver is installed automatically.
On all other devices, the touch screen driver must be subsequently installed to operate the touch screen. The
appropriate driver is available for download in the Downloads section of the B&R website (
).
6.3.1.4 Windows Embedded 8.1 Industry Pro
After starting Windows Embedded 8.1 Industry Pro on the Panel PC for the first time, the corresponding touch
screen driver is installed automatically.
On all other devices, the touch screen driver must be subsequently installed to operate the touch screen. The
appropriate driver is available for download in the Downloads section of the B&R website (
).
6.3.1.5 Windows 7 Professional / Ultimate
After installing Windows 7 on the device, the touch screen driver must be installed in order to operate the touch
screen. The appropriate driver is available for download in the Downloads section of the B&R website (
6.3.1.6 Windows Embedded Standard 7 Embedded / Premium
A touch screen driver will be installed automatically if a touch controller is detected during the Windows Embedded
Standard 7 installation.
The touch screen driver must be installed manually if a touch controller was not detected when installing Windows
Embedded Standard 7 or if an Automation Panel has been connected after installation. The appropriate driver is
available for download in the Downloads section of the B&R website (
6.3.1.7 Windows XP Professional
After installing Windows XP Professional on the device, the touch screen driver must be installed in order to operate
the touch screen. The appropriate driver is available for download in the Downloads section of the B&R website
).
6.3.1.8 Windows Embedded Standard 2009
After starting Windows Embedded Standard 2009 on the Panel PC or Power Panel for the first time (first boot
agent), the corresponding touch screen driver is installed automatically.
