B&R 5PC600.SE00-00, Руководство пользователя

Страница: 472 / 594

472
Accessories • Uninterruptible power supply
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2) Add-on UPS module 5AC600.UPSI-00
For more on installing the add-on modules, see chapter 7 "Maintenance / Servicing", section
4 "Installing the UPS module", on page 514.
3) Battery unit 5AC600.UPSB-00
4) UPS connection cable 0.5 m (5CAUPS.0005-00) or 3 m (5CAUPS.0030-00)
5) APC620 firmware versions:
To read the status or make changes to the settings of the APC620 add-on UPS
(5AC600.UPSI-00) and the APC620 battery unit (5AC600.UPSB-00), the following software
components are necessary:
For info regarding upgrading the firmware, see chapter 4 "Software", section 2.2 "Upgrade the
firmware", on page 335.
The APC620 firmware version can be read in BIOS under the main menu item "Advanced",
submenu item "Baseboard/Panel Features", or in the B&R Control Center.
The required firmware versions can be found in the APC620 / Panel PC firmware upgrade
(MTCX, SDLR, SDLT) V1.16
1)
.
Software name Type Version
MTCX PX32
1)
1) The software can be downloaded from the B&R homepage ( www.br-automation.com ).
Firmware 1.61 or higher
MTCX FPGA
1)
Firmware 1.18 or higher
ADI Control Center
1)
Driver / Control Center 1.60 or higher
Table 318: Firmware and software required for the UPS
Figure 224: Firmware and software required for the UPS
1) The software can be downloaded from the B&R homepage ( www.br-automation.com ).
Ad v anced
Baseboard / Panel Features
Versions
Panel Control
BIOS: R110
MTCX PX32: V1.74
MTCX FPGA: V1.25
Optimized ID: 00000010b
De v ice ID: 00001D13h
Compatibility ID: 0000h
Serial Number: 74430169136
User Serial ID: 11111111h
Product Name: 5PC600.SX05 - 00
Baseboard Monitor
L egacy De v ices
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Sa v e and Exit
ESC Exit
BIOS SETUP UTI L IT Y
v 02.66 (C)Copyright 1985 - 2009 , American Megatrends , Inc.
MTCX PX32 firmware
MTCX FPGA firmware
ADI driver version