B&R 500 Series, Руководство пользователя

Страница: 164 / 253

Software • BIOS options
164 Power Panel 500 User's Manual V 1.00
1.5.10 PCI Express Root Port 2
Warning!
Making settings carelessly can cause instability or device problems. Therefore, it is
strongly recommended that these settings only be changed by experienced users.
InsydeH2O Setup Utility Rev. *
Advanced
Control the PCI Express
Root Port. PCI Express Root Port 2 <Enabled>
Interrupt Pin 1 <Auto>
VC1 Enable <Disabled>
ASPM <Disabled>
URR <Disabled>
FER <Disabled>
NFER <Disabled>
CER <Disabled>
CT0 <Disabled>
SEFE <Disabled>
SENFE <Disabled>
SECE <Disabled>
PME Interrupt <Disabled>
PME SCI <Disabled>
Hot Plug SCI <Disabled>
F1 F9
Esc Enter F10
Help Select Item Change Values Setup Defaults
Exit Select Menu Select SubMenu Save and Exit
F5/F6
BIOS setting Meaning Setting options Effect
Enabled PCI Express Root Port 2 enabled. PCI Express Root Port
2
This option is used to enable/disable PCI
Express Root Port 2.
Disabled PCI Express Root Port 2 disabled.
Auto IRQ enabled for Root Port 2. Interrupt pin 1
Info:
This function must be disabled
when using ARwin and/or a field-
bus card.
Disabled IRQ disabled for Root Port 2.
Auto Setting the mapping via the BIOS set-
ting "VC1/TC Mapping".
VC1 Enable Virtual Channel 1
Disabled Disables this function.
The TC0 Traffic class is automatical-
ly used and mapped to the VC0 Virtual
Channel.
TC0 TBD
TC1 The TC1 traffic class is mapped manu-
ally to the VC1 Virtual Channel.
VC1/TC Mapping
1)
This option is used to define which traffic
will be mapped to which Virtual Channel.
TC2 The TC2 traffic class is mapped manu-
ally to the VC1 Virtual Channel.
Table 89: US15W Advanced - PCI Express Root Port 2 setting options