X20 system modules • Digital output modules • X20DO6322
1202
X20 system User's Manual 3.10
4.15.18 X20DO6322
4.15.18.1 General information
The module is equipped with 6 outputs for 1 or 2-wire connections. The X20 6-pin terminal block can be used for
universal 1-line wiring. 2-line wiring can be implemented using the 12-pin terminal block. The module is designed
for source output wiring.
•
6 digital outputs
•
Source connection
•
2-wire connections
•
GND for signal supply
•
Integrated output protection
•
1-wire connection type with 6-pin terminal block
•
OSP mode
4.15.18.2 Order data
Model number
Short description
Figure
Digital output modules
X20DO6322
X20 digital output module, 6 outputs, 24 VDC, 0.5 A, source, 2-
wire connections
Required accessories
Bus modules
X20BM11
Bus module, 24 VDC keyed, internal I/O supply continuous
Terminal blocks
X20TB06
X20 terminal block, 6-pin, 24 VDC keyed
X20TB12
X20 terminal block, 12-pin, 24 VDC keyed
Table 383: X20DO6322 - Order data
4.15.18.3 Technical data
Product ID
X20DO6322
Brief description
I/O module
6 digital outputs 24 VDC for 1- or 2-wire connections
General information
B&R ID code
0x1B98
Status indicators
I/O function per channel, operating state, module status
Diagnostics
Module run/error
Yes, using status LED and software
Outputs
Yes, with status LED and software status (output error status)
Power consumption
Bus
0.18 W
Internal I/O
0.71 W
Additional power dissipation caused by the actua-
tors (resistive) [W]
1)
+0.31
Electrical isolation
Channel - Bus
Yes
Channel - Channel
No
Certification
CE
Yes
cULus
Yes
cCSAus HazLoc Class 1 Division 2
Yes
ATEX Zone 2
Yes
KC
Yes
GL
Yes
GOST-R
Yes
Digital outputs
Design
FET positive switching
Nominal voltage
24 VDC
Switching voltage
24 VDC -15% / +20%
Nominal output current
0.5 A
Table 384: X20DO6322 - Technical data