B&R Industries Provit 5000, Руководство пользователя

Страница: 283 / 400

282 Provit 5000 User’s Manual
Software • BIOS for System Unit with Socket 370
3.2 Standard CMOS Setup
Date and Time
The real-time clock (RTC) can be set here. These settings are not saved in
FPROM (backup for CMOS RAM).
Hard Disks
Parameters for existing hard disks in the IPC are set here.
We recommend that you select AUTO. BIOS automatically detects the
specifications and the optimal operating mode of almost all IDE hard drives. When
you select AUTO for a hard drive, those specifications are detected during POST,
every time the system boots.
If you do not want to select the AUTO drive, there are some other options below:
• Match the specifications of your installed IDE hard disk or silicon disk with the
predefined values for drive types 1 through 45. If one of the predefined drive
types corresponds to your hard disk or silicon disk then you can select this
type.
• Select USER and enter the corresponding values into each drive parameter
field.
Figure 177: Standard CMOS Setup