B&R Industries Provit 5000, Руководство пользователя

Страница: 266 / 400

Provit 5000 User’s Manual 265
Chapt
er
6
So
ftw
are
Software • BIOS System for System Units with Socket 7 (ZIF)
Wake Up Events In Doze & Standby
ON determines the signal that can awake the listed IRQs from the IPC in Doze or
Standby modes. OFF can prevent a given IRQ from being deleted in Doze or
Standby modes. This is also possible for the following IRQs 3, 4, 8 and 12.
Power Down and Resume Events
Determine whether a signal can be awoken from one of the listed IRQs of the
system from the Suspend Mode.
2.6 PNP/PCI Configuration
Resources Controlled By
When set to AUTO, BIOS can automatically configure all Plug and Play
compatible and bootable devices. When set to Manual, all IRQ and DMA settings
can be made by the user.
By default (AUTO) during the BIOS system start, all ISA cards resources (I/O
address, IRQ, DMA port, memory) are assigned first and afterwards all Plug &
Play devices are then configured. No manual assignments can be made in the
BIOS Setup for resources from Plug & Play devices. This is only possible with ICU
(ISA Configuration Utility, available directly from Intel) or Windows 95/98/2000 as
well as Linux.
Figure 172: PnP/PCI Configuration