B&R Industries Power Panel 300, Руководство пользователя

Страница: 431 / 612

Software • Power Panel 300 with BIOS
Ch
apte
r 4
Soft
w
are
431 Power Panel 300/400 User's Manual V 2.30
To make changes in the BIOS setup, the DEL key must be pressed when booting the Power
Panel device as soon as the following message appears in the upper margin of the display
(during the POST):
If the message disappears before DEL has been pressed
1)
, then the Power Panel must be
booted again in order to enter BIOS setup.
The following keys
1)
help you navigate in BIOS setup:
Figure 269: Press DEL for setup
1) A USB keyboard is required to enter characters and operate BIOS setup pages.
Warning!
The following general rule applies: Only modify those settings that you completely
understand. On no account should settings be changed without a good reason. The
BIOS settings have been carefully chosen by B&R to guarantee ideal performance
and reliability. Even a seemingly minor change to the settings may cause the system
to become unstable.
Information:
The settings recommended by B&R can be loaded with "Load defaults". For a list of
the default values, see Section 1.5 "BIOS default values" on page 477.
Key Function
Cursor
↑
Moves to the previous item.
Cursor
↓
Go to the next item.
Cursor
←
Moves to the previous item.
Cursor
→
Go to the next item.
ESC Exits the submenu.
Enter or press highlighted character
shortcut Changes to the selected menu.
F1 and ALT+H Opens up a help window that describes the possible values for the highlighted item. Press ESC to exit
the help window. In a help window, the cursor
↑,
Cursor
↓,
Home, End, Page Up, and Page Down
keys can be used to navigate when help texts are longer than the displayable area.
Home Jumps to the first BIOS menu item or object.
End Jumps to the last BIOS menu item or object.
ALT+Q and ALT+X Enters the BIOS main menu.
Table 138: BIOS-relevant keys
Press DEL for Setup _