B&R Industries Power Panel 300, Руководство пользователя

Страница: 213 / 612

Technical data • Power Panel 400 with Automation Runtime
Chap
ter 2
Te
chn
ica
l da
ta
213 Power Panel 300/400 User's Manual V 2.30
Electrical characteristics 4PP420.0571-A5
Power supply
Rated voltage
Rated current
Starting current
Power consumption
Electrical isolation 18 - 30 VDC
0.5 A
Max. 1.2 A
Typically 12 W
Yes
Bleeder resistance 0
Ω
Mechanical characteristics
Outer dimensions
Width
Height
Depth 212 mm
156 mm
98 mm
Front
Frame
Design
Membrane
Dark gray border around display
Light background
Gasket
Aluminum, naturally anodized
6)
Gray
6)
Polyester
Similar to Pantone 432CV
6)
Similar to Pantone 427CV
6)
Flat gasket around display front
Housing Metal
Weight Approx. 2 kg (without aPCI interface modules)
Environmental characteristics
Ambient temperature
Operation
Storage
Transport 0 to +50°C
-20 to +60°C
-20 to +60°C
Relative humidity See 4.7.2 "Temperature humidity diagram" on page 214
Vibration
Operation (continuous)
Operation (occasional)
Storage
Transport 2 - 9 Hz: 1.75 mm amplitude / 9 - 200 Hz: 0.5 g
2 - 9 Hz: 3.5 mm amplitude / 9 - 200 Hz: 1 g
2 - 8 Hz: 7.5 mm amplitude / 8 - 200 Hz: 2 g / 200 - 500 Hz: 4 g
2 - 8 Hz: 7.5 mm amplitude / 8 - 200 Hz: 2 g / 200 - 500 Hz: 4 g
Shock
Operation
Storage
Transport 15 g, 11 ms
30 g, 15 ms
30 g, 15 ms
Protection type IP20 back side (only with installed CompactFlash card, inserted aPCI module
or with an optional aPCI cover)
IP65 / NEMA 250 type 4X, dust and sprayed water protection (front side)
Altitude
7)
Max. 3000 m
1) Maintenance Controller Extended.
2) At max. specified ambient temperature: typ. 50 ppm (4 seconds) - worst-case 100 ppm (8 seconds).
3) Typical lifespan (at 50% buffer operation, tempe25°C when off, +50°C when on).
Maximum lifespan in 24-hour operation (no buffer) 6 years at +25°C or 5 years at +50°C.
Maximum lifespan when switched off: 2 years at +25°C or 1 year at +50°C.
4) The actual value depends on the operating system or diver being used.
5) At +25°C ambient temperature. Reducing the brightness by 50% can result in an approximate 50% increase of the half-brightness
time.
6) Depending on the process or batch, there may be visible deviations in the color and surface structure.
Table 77: Technical data - 4PP420.0571-A5 (Forts.)