Technical data
58
Panel PC 2200 built-in devices User's manual V 1.05 Translation of the original documentation
2.2.6.3 USB interface
AP1000 panels with 10.4", 12.1" (4:3 format only), 15" (4:3 format only) and 19" display diagonals are equipped
with a front USB 2.0 interface. This is equipped with a USB interface cover. IP65 protection (front) is only provided
if the USB interface cover is correctly installed.
Warning!
USB peripheral devices can be connected to the USB interfaces. Due to the variety of USB devices
available on the market, B&R cannot guarantee their functionality. The functionality of USB devices
available from B&R is guaranteed.
Caution!
Due to the general PC specification, this interface must be handled with the utmost care with regard
to EMC, cable routing, etc.
Front USB
The front USB interface is available to the user for service purposes.
Universal Serial Bus (front USB)
1)
Type
USB 2.0
Variant
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed
(12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity
2)
Front USB
Max. 500 mA
Cable length
USB 2.0
Max. 5 m (without hub)
1x USB type A, female (sample image)
Front USB interface
Table 52: Front USB interface
1)
The interfaces, etc. available on the device or module have been numbered for the purpose of clear differentiation. This numbering may deviate from the
numbering used by the respective operating system, however.
2)
The USB interface is protected by a maintenance-free "USB current-limiting switch" (max. 500 mA).
