Before you Start …
Build the unit close to where it will be used. Handle all items carefully. Always lay panels down on a flat
smooth surface. Complete each stage before moving onto the next one.
Follow these guidelines and take your time.
Please ignore this guide if you have purchased a
Corner Wardrobe Conversion Kit.
If any parts are missing, please call the
Helpline on 01769 575500
and our team will get things sorted.
Important - If you have purchased a
Stable Wardrobe Conversion Pack
, please refer to the instructions
within that pack, for fitting of the stable conversion and exact positioning of the stable wardrobe.
Cross Head Screwdriver
Drill
Level
2.5mm
Drill Bit
5mm
Drill Bit
1 x RH Side Panel
1 x LH Side Panel
1 x Top Panel
1 x Base Panel (single sided)
1 x Shelf
1 x Back Rail
1 x Back Panel
1 x Plinth
1
2
3
4
5
6
Panels
Hardware
ASSembly Guide
minimum Tools Required
Hammer
WARdRObe
douBle
3 x
A
20 x
C
2 x
b
12 x
e
4 x
F
7
Fitted
bedroom
Range
1
2
3
4
5
6
12 x
G
4 x
H
8 x
i
8 x
J
Flat Head Screwdriver
Please use scissors to open the
bag of fittings and then empty
the contents into a bowl, so
that they do not get lost!
8 x
K
3 x
l
4 x
N
2 x
m
12 x
O
4 x
P
6 x
Q
1 x
R
Handles, Handle screws
&
doors
are to be supplied
independently and not covered by this guide.
4 x
d
8
8
PleASe keep all fittings away from young children
Bradawl
Scissors
Tape Measure
7
5 x
8 x
S
Screws are for fitting a
Traditional Cornice to your
Robe. If you are not fitting
a Traditional Cornice, you
will have these spare.
T
T
4 x
AT
