WiFi Setup
27
Disabled
If you do not want to use any security method for your wireless network,
choose
Disabled
.
Advanced WiFi Setting
AP Isolation:
This isolates all wireless clients and wireless devices on
your network from each other. Wireless devices will be able to
communicate with the Router but not with each other.
Frame Burst:
Enabling this option may provide your network with greater
performance.
Authentication Type:
The default is Open System authentication, where
the sender and the recipient do not use a WEP key for authentication. To
use a WEP key for authentication, select Shared Key.
Basic Rate:
The Basic Rate setting is not actually one rate of
transmission but a series of rates at which the Router can transmit. The
Router advertises its Basic Rate to the other wireless devices in your
network, so they know which rates are used. The Router also advertises
that automatically selects the best rate for transmission. The default
setting is
Auto
, where the Router can transmit at all standard wireless
rates. The Basic Rate is not the actual rate of data transmission. If you
want to specify the Router’s rate of data transmission, configure the
Transmission Rate
setting.