BandLuxe E5812P Series, Руководство пользователя

Страница: 17 / 68

Installation
15
Ground the CPE
For safety use, use the earth ground terminal to ground the CPE housing
before making any connections.
You need the following:

Spring washer

M 4x8 L screw
NOTE

The spring washer and M4x8L screw are not included in your package.
To ground the CPE:
1. Insert the washer to the M4x8L screw.
2. Attach the screw halfway into the
earth ground terminal.
3. Insert the grounding cable under
the washer.
4. Tighten the screw.
Connect to Computers
To use the Internet connection and configure the CPE settings, you must
connect your CPE to a computer.
Prepare two Ethernet cables for connection.
1.
Insert the other end of the Ethernet cable to “P+D OUT” port of the PoE adapter.
2. Connect another Ethernet cable to a Network Hub/Router or directly to
PC/Laptop via PoE adapter (“Data/IN” port).
3. Plug the PoE adapter to an electrical outlet.