1
Basic Controls and Displays
S
B
I M P LY
E T T E R !
B K
&
Soft Buttons
Drag and drop any com-
mand or macro from the
Universal IR Database.
Volume/Mute Buttons
Typically programmed for
control of the audio level.
Navigation Buttons
Backlight Button
Lights the keypad display
and recalls status feed-
back of the CT Receiver
on the bottom line of the
LCD display.
Power LED
Typically lights up when
the Zone/Room is on.
LCD Display
Labels on the screen
change depending on
what activity has been
selected.
Main Button
Takes the keypad back to
Main Page 1.
Fav Button
Takes the keypad to the
Favorites Page 1.
Page Button
Cycles through the pages
of commands or macros.
On/Off Buttons
Typically programmed for
a command or macro for
power of the Zone or
device.
Remote Control Target
Conceals an IR Sensor which relays commands from a
handheld IR remote to control the main system and
components connected to flahers.
Slave (Out)
Connects to the Master
(In) of any other zone
keypads via straight
CAT-5 cable terminated
with a RJ-45 connector.
Master (In)
Connects to the CT
Receiver Zone Control
I/O via straight CAT-5
cable terminated with
a RJ-45 connector.
Alternate Master In
Mirrors the connectors in
the Master (In) but
usable in a retro-fit
application.
Master Pin Out
1. +12V DC IN
2. KEYPAD IR DATA OUT
3. GROUND
4. N/C
5. RS-232 RECEIVE INPUT
6. GROUND
7. STATUS IN
8. +12VDC IN
Slave Pin Out
1. +12V DC IN
2. KEYPAD IR DATA OUT
3. GROUND
4. N/C
5. RS-232 OUTPUT
6. GROUND
7. STATUS IN
8. +12VDC IN
