B&K AVR 707, Руководство пользователя

Страница: 25 / 80

16
To Network
To Computer
Shown is a network router
which would assign an IP
address to the B&K.
Ethernet Communication
Connection Instructions
1 Make sure that all devices are powered off, including the B&K, Router, PCs, switches, etc.
2 Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router. Connect the other end to the
Ethernet port on the B&K. Repeat this step to connect more PCs or other network devices to the Router. Power the router as need-
ed.
3 Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port. Power on the cable or DSL modem, B&K product,
router, etc.
4 Power on your PC(s). Open the necessary B&K programs and either configure or control the AVR 707.
RS-232 Communication
Plug one end of a RJ-45 terminated straight through CAT-5 cable into the serial communications port on the back of the computer using
the serial DB-9 to RJ-45 Adapter. Plug the other end of the RJ-45 terminated cable into the RS-232 I/O port on the Receiver. Once your
COM settings are determined, configure the B&K Suite and B&K Editors for simple and easy setup. Note that many modern laptops do
not come equipped with a DB-9 style serial port. If your computer only has a USB style serial port, you'll need to obtain a USB to DB-9
Serial port adapter cable.
B&K offers a pre-made connector suitable for connecting a serial port to a standard network CAT-5 cable with RJ-45 connectors. However,
if you wish to make your own, please contact B&K Components for the pin connection.
USB Communication
The USB 2.0 connection is for use with computer control of the AVR 707. The port is currently not active at this time. Please select RS-
232 or Ethernet for full 2-way computer communication. Please see the B&K website for flash updates and further information.
Configuration and Control - Hardware Connections