©
Bandit Technologies Inc.
Seat:
Before beginning to ride your Bandit E-Bike, be sure to adjust your seat
so that the height and direction are optimal.
LED Headlight:
The LED Headlight is best used for nighttime riding. The light
can be switched on and off via the monitor by holding the “+” button.
Pedal:
Use the correct wrench (15mm) to tighten the pedals. Inspect this
component after every ride to ensure that the pedals are securely attached to
the crankset.
Disc Brake:
Please avoid touching the disc brake directly after riding. In case
of damage, be sure to replace this component before continuing to use your
E-Bike.
2 Assemble & Setup
2a Adjust Handlebar and Stem
1. Twist the stem 180deg so the headset is facing forward.
2. Remove the screws holding the mounting bracket in place.
3. Place the handlebar on the handlebar mount.
4. Re-install the mounting brackets. Ensure screws are tightly wound up.
2b Install Front Wheel
1. Prepare the quick-release handle and skewer.
2. Prepare the front wheel.
3. Flip the bike frame over for easy installation.
4. Place the front wheel on the front fork. Align the disk between the
brake calliper.
5. Insert the skewer into the axel. Keep the handle on the left side nearest
the disk plate.
6. On the other side, tighten the nut to secure the skewer into place.
7. Fasten the quick-release handle.
8. Ensure the quick-release handle is locked to complete front-wheel
installation.
2c Seat Installation
1. Twist counterclockwise to loosen the screw.
2. Insert the seat tube into the socket.
3. Adjust seat height and direction before re-tightening the screw.
Page | 2
Содержание X-TRAIL LITE
Страница 1: ...Owner smanual Videotutorial Scanme ...
