background image

| 117

Appendices | 

V90 Operating Manual

CH TX (MHz) RX (MHz) Mode

Traffic Type

Ship to 

Ship

Ship to 

Shore

Name Tag

Remark

77 156.875

156.875

S

Port Operations

Yes

Yes

PORT OPS

1

 1W only

78A 156.925

156.925

S

Boat Operations, Recreational

Yes

No

SHIP - SHIP

79A 156.975

156.975

S

Commercial

Yes

Yes

COMMERCIAL

80A 157.025

157.025

S

Commercial

Yes

Yes

COMMERCIAL

81A 157.075

157.075

S

U.S. Government, Environmental Protec-

tion Agency Operations

Yes

Yes

RESTRICTED

4

82A 157.125

157.125

S

U.S. Government, Canadian Coast Guard

Yes

Yes

RESTRICTED

4

83A 157.175

157.175

S

U.S. Government, Canadian Coast Guard

Yes

Yes

RESTRICTED

4

84 157.225

161.825

D

Public Correspondence, Marine Operator

No

Yes

TELEPHONE

84A 157.225

157.225

S

Public Correspondence, Marine Operator

TELEPHONE

85 157.275

161.875

D

Public Correspondence, Marine Operator

No

Yes

TELEPHONE

85A 157.275

157.275

S

Public Correspondence, Marine Operator

TELEPHONE

86 157.325

161.925

D

Public Correspondence, Marine Operator

No

Yes

TELEPHONE

86A 157.325

157.325

S

Public Correspondence, Marine Operator

TELEPHONE

87 157.375

161.975

D

Public Correspondence, Marine Operator

No

Yes

TELEPHONE

87A 157.375

157.375

S

Public Correspondence, Marine Operator

COMMERCIAL

88 157.425

162.025

D

Public Correspondence, Marine Operator

No

Yes

TELEPHONE

88A 157.425

157.425

S

Commercial, Inter-ship Only

Yes

No

COMMERCIAL

Special notes on USA channel usage

1.  Low power (1 W) only.

2.  Receive only.

3.   Low power (1 W) initially. Override to high power by holding down 

H/L key before transmitting. Used normally in bridge-to-bridge 
communications.

4.  Lightly shaded simplex channels 03A, 21A, 23A, 61A, 64A, 81A, 

82A, and 83A cannot be lawfully used in U.S. waters unless special 
authorization is obtained from the U.S. Coast Guard. Not for use by 
the general public.

5.  The letter “A” illuminated by the channel number indicates the USA 

channel is simplex.

This same channel is always duplex when selecting International. 
There is no “A” reference for Interna tional channels. The letter “B” is 
only used for some Canadian “Receive only” channels.

6.  Channel 70 is designated for use exclusively for Digital Selective 

Calling (DSC), such as Distress, Safety, and Ship Calls. No voice 
communication is allowed on CH70. This channel is only available 
on DSC enabled radios.

KEY: S = Simplex operating channel; D = Duplex operating channel

Содержание V90


































































































































Отзывы: