B&G Hydra 2000, Руководство пользователя

Страница: 127 / 147

Hydra 2000 User Manual
Part 6 - Diagnostic Data
HB-0844-02
6-11
6.4 ERROR MESSAGES
6.4.1 Error Messages
Following is a list of error messages output on the displays.
Er01 Error detected reading the analogue to
digital converter on the depth sounder
board. This can be an indication of a fault
on the board or that the sea water
temperature or the compass signals are
outside their normal range. Try
disconnecting the sensors in turn.
Er02 Error detected when writing to the analogue
to digital converter on the depth sounder
board. This can indicate the same
problems as Er01.
Err.3 Syntax or parity error on received NMEA
data.
Err.4 Checksum error on received NMEA 0183
data.
CAL Alternating with a function value indicates
that it has yet to be calibrated. This will
happen after a system reset or if the
internal battery is exhausted.
NO SPACE FFD memory full, too many functions have
been declared.
NOT FOUND New function declared without text.