B&G Hydra 2000, Руководство пользователя

Страница: 110 / 147

Hydra 2000 User Manual
Part 5 - Options
HB-0844-02
5-13
an FFD, select the NAVIGATE Menu and then OFF CRSE as
described in
Part 2 - Operating Information.
5.8.5 Stored Course Function
Up to 10 preset courses, numbered CRS 1 to CRS 10, may be
stored at any one time
. When the Stored Course function is
selected by operation of the Page Key the display changes to
show the selected course number with the value immediately
below
. All courses are retained in the Halcyon Display memory
during power off so that the desired courses may be entered prior
to departure.
To select a specific course number proceed as follows:
(1) Select the Stored Course Function by successive
presses of the
Page Key until the display shows the
Stored Course Function.
(2) Press Scroll Up and CRS 1 will flash.
(3) Using the Scroll Up and/or Scroll Down Keys
select the course (CRS) number required.
(4) Press the Enter Key to enter the selected course as
the reference.
To change the value of any stored course proceed as follows:
(1) Select the Stored Course Function by successive
presses of the
Page Key until the display changes to
show the Stored Course Function.
(2) Press the Scroll Down Key and the stored value of
the course selected will flash.
(3) Using the Scroll Up and Scroll Down Keys change
the value to the new course.
(4) Press the Enter Key to enter the new course.
5.8.6 Head/Lift Trend Function
This function is particularly useful to racing yachtsmen when
sailing upwind
. A port and starboard reference course can be set-
up for each tack with reference to the current mean wind direction .
They are then used to calculate whether the vessel is being ’lifted’