MPA-50M
V3
4
MODE 2: Setting up the SIREN tone
1. Pull up SIREN.
2. While SIREN is active, press and release M.WAIL to switch
among the available tones (PHASER, WAIL, Hi-Lo & YELP).
PUBLIC ADDRESS VOLUME ADJUSTMENT
1. Press and hold the PTT button on the Hand MIC.
2. While PTT is held pressed, pull up the switch to M.WAIL
to raise the volume, and pull down the switch to HORN to
lower the volume.
3.
Release PTT to leave configuration mode. The volume level selected upon releasing PTT will be saved by the
equipment.
Energy Saving Mode
The equipment continuously tracks the incoming voltage status, if the voltage drops
below 11V the equipment enters energy saving mode. While on this mode, upon pressing
the switch the functions will not execute and the equipment will beep 2 times.
Once the incoming voltage is over 11V, the equipment returns to normal operation.
TECHNICAL SPECIFICATIONS
ELECTRONIC MODULE
OUTPUT POWER
46 W
AMPLIFIER
D class
INPUT VOLTAGE
11 - 15 V DC
POLARITY
Negative to earth
TEMPERATURE RANGE
0 - 60 ºC
CURRENT CONSUMPTION
4 A (max)
DIMENSIONS
96 x 81 x 24 mm | 3.8’’ x 3.2’’ x 0.9’’
WEIGHT
200 g
SOUNDS
WAIL (800 - 1670 Hz), PHASER (1100 - 2450 Hz), YELP (1030 - 1650 Hz), Hi-Lo (820 - 1150 Hz),
HORN (580 - 1550 Hz), & MANUAL WAIL (800 - 1670 Hz)
SWITCHBOX
SWITCHES (2)
MOM/OFF/MOM (1) | ON/OFF/ON (1)
CONTACT
50 mΩ (max)
ISOLATION
500 V DC 1000 MΩ
TEMPERATURE
-25 - 85 ºC
DIMENSIONS
44 x 92 x 46 mm | 1.7’’ x 3.6’’ x 1.8’’
LOUDSPEAKER
IMPEDANCE
8 Ω
FREQUENCY RESPONSE
500 Hz - 10 kHz
SOUND PRESSURE LEVEL
108 ±3 dB 1w/m @1.5 kHz
DIMENSIONS
113 x 132 x 96 mm | 4.4’’ x 3.8’’x 5.2’’
WEIGHT
1130 g
B&G ELECTRÓNICA | ONE YEAR LIMITED WARRANTY
BYG Electrónica S.A.S. guarantees that this product leaves the factory free from defects related to materials and manufacturing.
If a failure related to materials and manufacturing were to occur during the period of one year after the date of purchase, BYG
Electrónica S.A.S. would repair or replace the failing equipment free of charge.
This warranty shall be voided if the product is modified, tampered with, misused, or subjected to abnormal working conditions. This
warranty does not cover physical damage to the product surface. This warranty does not apply when the malfunction results from
the use of this product in conjunction with accessories, other products, or peripheral equipment not designed by BYG Electrónica.
