Issue
Remedy
1
Normal operation (door is fully open)
2
3
Change Auto-lock battery
4 Wireless PE battery is low
Change PE Battery
5
6
7
Standby battery is faulty
8 Door was obstructed
9 Motor overloaded or
stalled
6 . 0 T R O U B L E S H O O T I N G
PE is precenting door
from moving
Clear away any obstructions.
Test Door. If unable to move
the door and suspect beam
is faulty, enter Safety Beam
Emergency Close by
pressing and holding a
pre-coded transmitter button
until the door closes.
Main Light = Service / Warning Indicator:
Requirements for a service and user warnings are indicated
after operation by the main light repeatable flashing OFF a
number of times followed by a pause.
The below table identifies the issues and remedies
Wireless Auto-Lock
battery is low
Wireless Auto-Lock is not
unlocked and preventing
door moving
Check Auto-Lock, test by
pressing emergency release
button on the lock and the
test door operation.
Maintenance is due after
pre-set number of cycles.
Contact dealer to arrange
service.
Contact 1300 769 850 within
Australia for assistance.
Clear away any obstructions
and test door opens/closes
correctly. (if the door is
damaged, contact a door
professional)
Contact dealer to arrange a
door service.
