B&C BC3500, Руководство по установке

Страница: 18 / 19

18
Wireless Control Corded Opera-
The Wireless transmitter can become a 4 me-
tre corded control when required or if preferred.
There is a Wired Lead In adaptor at the top of
the transmitter. Remove the cap to expose a
locating point which matches that of the cord.
Once connected it has a threaded locking
sleave for retention. The opposite end will plug
into the control box socket, also use the locking
sleave to secured into position .
Once connected the Indicator Light Wired will
confirm the wired control is now in use.
The Operate Out In buttons can now be used.
Pairing receiver to transmitter
If The transmitter is replaced or requires re pairing to the receiver follow these step.
1/ Remove receiver from control box socket but leave power on at the control box.
2/ Hold down On Off Mode Button on transmitter until turned on.
3/ Press In & Out button simultaneously and hold until both Indicator lights remain on.
4/ When lights begin to slowly flash keep your buttons pressed while reconnecting the
receiver to control socket.
5/ Continue holding In Out button down until the indicator light turn off. Release the but-
tons and the receiver and transmitter are now paired.