background image

-6-

DRIVING POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002 in.lbs
FASTENER TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CLIPPED HEAD NAIL

(.113" to .131")

FASTENER RANGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2"  to  3  1/2"
MAGAZINE CAPACITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87 NAILS
WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  LBS
OPERATION PRESSURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70  to  120 PSI
AIR INLET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4" NPT

TOOL-FREE MULTI-DIRECTIONAL EXHAUST

The tool-free exhaust can be adjusted to any positions depending on operator preference.

SELECTABLE TRIGGER

The selectable trigger lets the operator choose between from Contact Actuation and Single Sequential
Actuation.

LIGHT WEIGHT ALUMINUM HOUSING

The light weight aluminum housing helps reduce work fatigue.

TOOL-FREE DRIVE DEPTH ADJUST

The tool-free depth adjust lets the operator select precise driving depth of the fastener.

DRY-FIRE LOCKOUT

The drive-fire lockout extends driver life and prevents missing nails.

REAR-LOADING MAGAZINE

The rear loading magazine offers quick reloading of fasteners.

PRODUCT SPECIFICATIONS

REAR LOADING

MAGAZINE

LIGHT WEIGHT

ALUMINUM

HOUSING

TOOL-FREE

MULTI-DIRECTIONAL

EXHAUST

DRY-FIRE

LOCK OUT

TOOL-FREE DRIVE

DEPTH ADJUST

SELECTABLE

TRIGGER

Содержание SN3490













Отзывы: