background image

iMcV-DS3/E3/STS 

Repeater 

Operation Manual  

 

 

 

ii

 

FCC Radio Frequency Interference Statement 

This equipment has been tested and found to comply with the limits for a Class A computing device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial 
environment.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications.  Operation of this equipment in a residential area is likely to 
cause harmful interference in which the user will be required to correct the interference at his own expense.  
Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. 
The use of non-shielded I/O cables may not guarantee compliance with FCC RFI limits.  This digital apparatus does not exceed the Class A 
limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of 
Communications. 
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de classe A 
prescrites dans le Règlement sur le brouillage radioélectrique publié par le ministère des Communications du Canada. 

Limited Lifetime Warranty 

Effective for products of B&B Electronics shipped on or after May 1, 2013, B&B Electronics warrants that each such 

product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is applicable 
solely to the original user and is not transferable. 

This warranty is expressly conditioned upon proper storage, installation, connection, operation and maintenance of 
products in accordance with their written specifications.  

Pursuant to the warranty, within the warranty period, B&B Electronics, at its option will: 

1. Replace the product with a functional equivalent; 

2. Repair the product; or 

3. Provide a partial refund of purchase price based on a depreciated value. 

Products of other manufacturers sold by B&B Electronics are not subject to any warranty or indemnity offered by B&B 

Electronics, but may be subject to the warranties of the other manufacturers. 

Notwithstanding the foregoing, under no circumstances shall B&B Electronics have any warranty obligations or any other 

liability for: (i) any defects resulting from wear and tear, accident, improper use by the buyer or use by any third party 

except in accordance with the written instructions or advice of the B&B Electronics or the manufacturer of the products, 
including without limitation surge and overvoltage conditions that exceed specified ratings, (ii) any products which have 

been adjusted, modified or repaired by any party other than B&B Electronics or (iii) any descriptions, illustrations, figures 
as to performance, drawings and particulars of weights and dimensions contained in the B&B Electronics’ catalogs, price 

lists, marketing materials or elsewhere since they are merely intended to represent a general idea of the products and do 

not form part of this price quote and do not constitute a warranty of any kind, whether express or implied, as to any of the 
B&B Electronics’ products. 

THE REPAIR OR REPLACEMENT OF THE DEFECTIVE ITEMS IN ACCORDANCE WITH THE EXPRESS WARRANTY SET 
FORTH ABOVE IS B&B ELECTRONIC’ SOLE OBLIGATION UNDER THIS WARRANTY.  THE WARRANTY CONTAINED 

IN THIS SECTION SHALL EXTEND TO THE ORIGINAL USER ONLY, IS IN LIEU OF ANY AND ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED, AND ALL SUCH WARRANTIES AND INDEMNITIES ARE EXPRESSLY DISCLAIMED, 
INCLUDING WITHOUT LIMITATION (I) THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND 

OF MERCHANTABILITY AND (II) ANY WARRANTY THAT THE PRODUCTS ARE DO NOT INFRINGE OR VIOLATE THE 
INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY.  IN NO EVENT SHALL B&B ELECTRONICS BE LIABLE FOR 

LOSS OF BUSINESS, LOSS OF USE OR OF DATA INTERRUPTION OF BUSINESS, LOST PROFITS OR GOODWILL OR 

OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES.   B&B ELECTRONIC SHALL 
DISREGARD AND NOT BE BOUND BY ANY REPRESENTATIONS, WARRANTIES OR INDEMNITIES MADE BY ANY 

OTHER PERSON, INCLUDING WITHOUT LIMITATION EMPLOYEES, DISTRIBUTORS, RESELLERS OR DEALERS OF 
B&B ELECTRONIC WHICH ARE INCONSISTENT WITH THE WARRANTY, SET FORTH ABOVE. 

 

Содержание iMcV-DS3












Отзывы: