EIDM-EXTEND-2 Long Range Ethernet Extender
3
3. Features
ITU-T Rec. G.991.2 G.shdsl.bis Compliance.
SHDSL Trellis Coded Pulse Amplitude Modulation (TCPAM) Line Code.
Fixed Data Rate Selection from 10.8Mbps to 128Kbps for 2-pair SHDSL lines.
Adaptive Data Rate from 4608Kbps to 192Kbps for 1-pair SHDSL mode.
Adaptive Data Rate from 9216Kbps to 384Kbps for 2-pair SHDSL mode.
Maximum Transmission Distance: 20,500 ft over 26AWG twisted pair.
Noise Margin
≧
1 dB is guaranteed for fixed rate and adaptive rate modes.
Remote side follows central side’s speed for 192Kbps~2304Kbps in 1-pair fixed rate
mode.
Remote side follows central side’s speed for 384Kbps~4608Kbps in 2-pair fixed rate
mode.
RJ-48 Interface for SHDSL line connections.
Two RJ-45 Connectors for 10/100Base-TX Ethernet Switch ports.
Ethernet Auto-Negotiation for 10/100Base-TX.
Ethernet Auto-MDIX for Auto Tx/Rx Swap.
Console Port for Network Management Configurations.
8 LED status indicators.
Power Input: 100-240VAC.
4. Packing Contents
Inside the package you should find:
(1)
One EIDM-EXTEND-2 Long Range Ethernet Extender unit (260x151x44mm)
(2)
One power cord
(3)
One RS232 cable
(4)
One CAT 5 Ethernet Cable
(5)
One Quick Start Guide
(6)
One User’s Manual on CD-ROM
(7)
Rubber Feet
Please check to see whether the package is damaged before unpacking. Also please check
contents to see whether any components are missing. If so, please contact B&B Electronics or
your vendor immediately for replacement.
