TT-100 Welding Positioner
Bancroft Engineering, LLC
21550 Doral Road Waukesha, WI 53186
Phone: (262)786-1880
www.bancrofteng.com
V1.0
P
a
g
e
7
OPERATIONS
1.
Control Functions
2.
Operational Procedure
This positioner is made to control TIG welding noise, but to ensure safety, use separate power supplies
for the main unit and the welding power. During operation, do not allow the main unit cable and torch
cable to cross each other.
1 Turn on buildings main power supply and the power to the positioner.
2 Adjust the table angle to desired location.
3 Attach a workpiece to the table.
4 Set the rotational speed to 2.
5 Select the direction of rotation using the 3 position switch.
6 If optional foot pedal is connected, press pedal to start rotation.
7 Adjust the rotation speed as needed.
8 Perform welding work.
9 Turn off the unit.
10 Remove the workpiece.
Main Unit
