1. In order to better maintain your walking machine and prolong the life of the machine, it is
recommended that you turn off the power after 2 hours of continuous use and let the machine
rest for 10 minutes before using it.
2. If the running belt is too loose, there will be slippage during running; if it is too tight, it may
reduce the performance of the motor and increase the wear of the roller and running belt. When
the running belt is tight enough, you can lift both sides of the running belt about 50-75mm away
from the running board by hand.
Adjustment of running belt alignment and tightness
In order for you to use the walking machine better and make the walking machine work better,
it is necessary to adjust the running belt to the best condition.
Running belt alignment:
Put the walking machine on a flat ground (press and hold the speed plus and minus keys of the
remote control at the same time for more than 3 seconds).
Run the walking machine at a speed of about 4 km/h.
If the running belt is skewed to the right, turn the right adjustment bolt 1/2 turn clockwise, and
then turn the left adjustment bolt 1/2 turn counterclockwise. Figure A
If the running belt is skewed to the left, turn the left adjustment bolt 1/2 turn clockwise, and then
turn the right adjustment bolt 1/2 turn counterclockwise. Figure B
MAINTENANCE INSTRUCTIONS
13
Figure A
Figure B
