manualshive.com logo in svg

Bananza UHAM150, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Bananza UHAM150 Скачать руководство пользователя страница 1

WARNING

FOR YOUR  SAFETY

If you smell gas:

 

 1.  Open windows.
  2.  DO NOT try to light any appliance.
  3.  DO NOT use electrical switches.
  4.  DO NOT use any telephone in 
   your building. 
  5.  Extinguish any open flame.
  6.  Leave the building.
  7.  Immediately call your local gas
   

supplier after leaving the building.

   

Follow the gas supplier’s

   instructions.
  8.  If you cannot reach your gas
   

supplier, call the Fire Department.

Fire Hazard

Keep all flammable objects, liquids and 
vapors the minimum required clear-
ances to combustibles away from 
heater.

Some objects will catch fire or explode 
when placed close to heater.

Failure to follow these instructions can 
result in death, injury or property 
damage.

WARNING

Installation must be done by a contractor qualified 
in the installation and service of gas-fired heating 
equipment or your gas supplier.

Improper installation, adjustment, alteration, service 
or maintenance can result in death, injury or 
property damage. Read the Installation, Operation 
and Service Manual thoroughly before installing or 
servicing this equipment.

Installer

Please take the time to read and understand

these instructions prior to any installation.

Installer must give a copy of this manual to the owner.

Owner

Keep this manual in a safe place in order to provide

your service technician with necessary information.

Installation, Operation 

& Service Manual

Models UHA[T][M][X][S]

150, 175, 200, 225
250, 300, 350, 400

UHA-Series

Tubular Unit Heaters

(Standard Range)

P/N BN111101NA 11/14 Rev. J

BANANZA

© 2014 Roberts-Gordon LLC

BANANZA

1100 Seven Mile Road NW
Comstock Park, MI 49321

Telephone: +1.616.726.8800

Fax: +1.616.726.8807

Toll Free: 800.255.3416

www.bananza.com

Содержание UHAM150









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды