Banana Pi BPI-D1, Быстрый старт

Страница: 3 / 12

[Reminder]: Real-time video may be delay, which related to the network transmission.
4.How to view files
Option
① ： Remove the SD card from the board and insert it into the SD card reader of a computer.
Option
② ： Battery mode, using micro-USB data cable to connect the D1S and PC. PC client can
access the contents of TF card through the data cable, while charging the lithium battery.
[Reminder]: Micro-USB interface supports USB flash disk connected through USB female port of
OTG cable, Support directly copy files from the TF card to the external usb drive.
Option
③ ：
Connect PC or mobile devices to the SSID access point named“BPI_D1_XXYYZZ”, and
access files at the FTP address ftp://192.168.0.1.
[Reminder]: Support IE, Chrome, Opera, Safari or Firefox browser login FTP to view or download. If
you need play the video you will need to install player support for H.264 or MJPEG decoding format.
5.How to set
Record Parameters Settings
When D1S power is ON, video recording will start automatically according to the default set. If you
want to set the D1S video parameters, you can refer to the following steps:
1.Switch on the WiFi and switch to the AP mode
（
The LED light will remain steady
）
. Connect any
mobile devices (e.g. smartphone, tablet or computer) to the WiFi, connection “SSID=
BPI_D1_XXYYZZ” and enter the FTP address “ftp://192.168.0.1”.
[Reminder]: User Name: admin; Password: admin
2.Click the "Video Settings" or "Record Settings" can adjust the record parameters.
[Reminder]: After saving the changed settings
， all setup are validated only after manually re-open after
switching off the device.
Video Settings
"Video" related to the format of the final recorded and resolution, devices support the two coding
formats which are H.264 and MJPEG; relevant parameters can be set manually according to the
required. After setting
， click "Save".