ELECTRICAL CONNECTION
The electrical connection is made by means of a 3-pin valve plug according to DIN EN 175301-803-A with PE connection.
NOTICE!
- The bistable switch is designed for an application with 1mA to 3A at 4 to 250V. However, the switch may only be used in one and the same
type of circuit during its entire period of use!
- When assembling the valve plug, mount the plug insert so that the connection cable points in the desired direction
CONTACT POSITION
Terminal 2 = Root
When mounted on the right holding rail:
On underrun: 2 - 3 closed / 2 - 1 open
On overrun: 2 - 1 closed / 2 - 3 open
When mounted on the left holding rail:
On underrun: 2 - 1 closed / 2 - 3 open
On overrun: 2 - 3 closed / 2 - 1 open
For special version with clamp for piping 63mm
On underrun: 2 - 3 closed / 2 - 1 open
On overrun: 2 - 1 closed / 2 - 3 open
LEV
10-05-2023
M-560.11-EN-AA
560-11
/2
BISTABLE SWITCH
MAGTOP Snap 201
22, Rue de la Voie des Bans · Z.I. de la gare · 95100 ARGENTEUIL
Tel
Fax
+33 (0)1 30 25 83 20
+33 (0)1 34 10 16 05
Web
www.bamo.eu
INTERNATIONAL
