Page
12
776 M0 01 C
24-04-2014
4. Exchange of measuring device
• Switch off power before disconnecting the electrical connections
• Please note that after replacing the flowmeter
a) the programming of the previous flowmeter should be saved and copied on the new flowmeter
b) when using the dosing function, set a quantity
Repair, hazardous substances
Before sending the BAMOFLONIC for repair, the following precautions must be taken:
• Clean all process chemicals from the device.
Fully rinse the flow path.
Please pay close attention to the process fittings.
All media must be removed before returning.
This is particularly important, if the medium to be measured is health hazardous.
Devices judged to be insufficiently cleand will be returned to sender.
No inspection of device will be done until proper cleaning is completed by user.
• Attach a detailed report describing the failure, the application and the physical-chemical properties
of the medium parameters,
and the decontamination certificate (see last page).
5. Technical specifications
5.1 Dimensions and weight
!
WARNING
!
WARNING
DN
Connection
A /mm
B /mm
C /mm
D /mm
E /mm
F /mm
Weight /g
DN10
½ G or NPT
147.0
84.0
83.0
70.5
15.0
5.0
332
DN15
¾ G or NPT
147.0
84.0
84.5
71.1
15.0
5.0
344
DN20
1 G or NPT
160.0
84.0
94.2
77.6
15.0
5.0
414
DN25
1 ¼ G or NPT
168.0
84.0
98.5
77.6
15.0
5.0
454