O
PERATING
I
NSTRUCTIONS
T
URBIDITY
L
IMIT
-V
ALUE
E
VALUATION
U
NIT
TURBISWITCH
GS4
WITH
M
EASURING
S
ENSOR OR
I
MMERSION
P
ROBE
BAMO IER GmbH
Pirnaer Str. 24
D-68309 Mannheim, Germany
Phone: +49 (0)621 84224-0
Fax: +49 (0)621 84224-90, e-mail: [email protected]
Internet: www.bamo.de
SU3547f.doc
12/18
6
Installing and Connecting the Immersion Probe:
The following measuring ranges apply when the TURBISWITCH CP2 immersion probe is used:
Minimum acquirable turbidity in the low range begins at roughly 100 to 300 FAU.
Maximum acquirable turbidity in the high range:
Approx. 30,000 FAU i.e. roughly 100 g/l SiO2
Maximum acquirable turbidity in the medium range:
10% of the high range
Maximum acquirable turbidity in the low range:
1% of the high range
Installing the immersion probe:
The TURBISWITCH CP2 immersion probe is intended for installation into slurry tanks, open troughs and containers
for monitoring turbidity, or as a sludge level indicator.
Install the probe so that it can be easily removed for cleaning.
Cleaning intervals depend on operating conditions.
Do not scratch the lenses while cleaning!
Installing the TURBISWITCH CP2 ZK/Z0 immersion probe:
Z0: Shipped without installation materials.
ZK: Install using the included mounting bracket and adjuster fitting.
Attention:
In the case of powerful flow or viscous media, the cable may not be
overstretched. If this is the case, a strain relief must be secured to the two
holes in the base of the probe (cord, retaining rod or the like). The holes are
laid out so that M6 threads can be cut into them if required.
Installing the TURBISWITCH CP2 ZR immersion probe:
For permanent installation to tanks or basins, the CP2 immersion probe is
available with a probe tube which can be screwed off.
Electrical connection:
Turbiswitch GS4
3
2
4
14
16
9
11
12
13
15
6
8
N
L
10-30V DC
V+
Fuse
Power
supply
RX
OC
Fa
ilu
re
Li
m
it
-v
a
lu
e
<
<
Lim
it
-v
a
lue >
>
V+
1
Shield (supply-)
brown ()
white (Signal)
Immersion
probe
CP2-HDR
Limit-value
passed
Limit-value
underrunned
9
12
11
9
12
11
no
failure
13
15
failure
13 15
100-255V AC
Signaling and
controlling equipment
Switching logic
Attention!
All relays contacts are open when supply
power is switched off.
