background image

12

WARNINGS:

BAME s.r.l. 

, as manufacturer, can not be held responsible for damages 

due to wrong or missing connections or due to an improper setting.

The safety devices should be always installed and kept in full working order.

Once terminated the system setting, you should place back the container 
on its position, fastening tight its screws.

BAME s.r.l. 

, as manufacturer, can not be held responsible for damages 

due to improper use of the door/gate.

It is forbidden to replace any electric, electronic or mechanic part with not 
original spare parts.

BAME s.r.l. 

, has the right to modify or change the electronic boards and 

manuals, without prior notice.

Always regulate accurately the torque of the motors. An incorrect setting of 
the torque may cause damage to people, animals or objects.

WARRANTY:

46020, 

Italy

San Giacomo Segnate (MN)

BAME s.r.l.

Grottazzolina (FM)

Leonardo da Vinci, 23

E. Berlinguer, 6

63844, Italy

Tel. +39 

0376 616638

Tel.

 +39 0734 63

3533

Fax +39 0

376 629456

 Fax +39 0734 636895

www.bame.it

www.delma.it

e-mail:i

nfo

@

bame

.it

e-mail: [email protected]

Devices and accessories are guaranteed for a period of 24 months after 
production, whose date is printed on each item. The company will replace 
or repair its devices, provided that they are returned to our factory with the 
warranty label in good conditions. In case of replacement of the returned 
items, these will remain property of the company. The warranty does not i
nclude damages due to any incorrect use, such as: non fulfilment of the 
instruction detailed for each device, maintenance and servicing carried out 
without the previous written consent of our company. 
Moreover, warranty does not cover any damage due to wrong tension 
supply and any other reason for which the manufacturer cannot be made 
responsible. Any device returned must be delivered to our company with 
carriage paid and will be sent back with freight collect.
Warranty validity ceases if customer’s payments are not fulfilled. 
Each device manufactured by our company meets the european safety 
standards. Our company declines all responsibility for the non-observance 
of the safety rules by the installers. 

In order to reduce the time spent for servicing the returned items, all faulty 
materials which have been sent back to us must be accompanied by the 
installer description of the item fault.

Содержание DELMA













Отзывы: