Bambi BC-62 Скачать руководство пользователя страница 8

OPERATION

Baby unit

1. Long press the power ON/OFF button       1   for 3 sec to switch on the unit. The 

power  on  icon           7   should  light  up  steady  green.  To  turn  off,  long  press  the      

button       1  again.

2. Place the unit about 1 m from the crib with the microphone 11 facing towards the 

baby.

3. Adjust the microphone sensitivity using the       button  2  and          button  3  such 

that the unit will be set to transmit whenever the microphone 11 picks up a sound at 

your  desirable  loudness  level.  The  intensity  of  night  light   6   will  change  during 

adjustment.  The  higher  the  intensity,  the  more  sensitive  is  the  microphone  11  to 

sound. There are total 5 levels of microphone sensitivity. When the maximum level 

is reached, further press of the     button   3   will set the unit into continuous transmis-

sion  mode  (i.e.  the  unit  will  transmit  even  without  detecting  a  sound)  and  the

000      

     

icon 10 will light up steady green.

4. Once the unit is in transmit mode, the transmit icon        8   will light up green. The 

unit will return to standby mode a few seconds after the microphone 11 stops picking 

up any sound and the transmit icon        8  will go off. Except when the unit is set in 

continuous transmission mode, the transmit icon        8  will stay steady on.

5. The night light  6  can be set permanently ON by pressing the       button   4  . Each 

press of      button  4  will increase the level of light intensity ( maximum 5 levels). 

The night light  6  can also be set to VOX (voice activated) by pressing           button   

5  . Under VOX mode, the            icon    9  will light up and night light  6   will be 

switched on once the microphone 11 detects a sound and automatically fade off a 

few seconds after the sound stops.

5. The condition of the battery is shown by the power on/low battery icon       7  . When 

the battery level becomes running low, the power on/low battery icon        7   turns 

red. Replace with new battery or use the supplied AC adapter.

Parent unit

1. Long press the power ON/OFF button      13 for 3 sec  to switch on the unit. The 

power  on  icon         18  should  light  up  steady  green.  To  turn  off,  long  press  the      

button     13 again.

2. Place this unit at a reasonable distance away from the baby unit to avoid feedback. 

ON

Too close a distance will create a screeching sound at the speaker 21.

8

Содержание BC-62















Отзывы: